Finding the right kit will require measuring the existing shackle straps on your 2023 Venture RV Stratus SR281VBH. I recommend getting the MORryde Suspension Upgrade Kit for Tandem Axle Trailers. The kit includes 1/2" thick shackles, wet bolts, and bronze bushings. If your center hole to center hole measurement is 2-1/4" you need the # MR46ZR and for 3-1/8" the # MR76ZR.
Before getting the Road Armor Shock Absorbing Equalizer Kit # LC696740 I would also measure the existing equalizers.... view full answer...
The correct replacement hardware kit for your Fastway e2 4.5k system is the Replacement Hardware Kit for Fastway e2 Weight Distribution Head # FA92-02-9600.
The Replacement Bolts for Equal-i-zer Weight Distribution Head # EQ90-02-9400 you asked about is for Equal-i-zer Weight Distribution Systems.
There is not a specific lifespan for a weight distribution system. If maintained and the system is properly rated for your towing setup, it can potentially last for a long time. Over time, the... view full answer...
According to the folks at MaxxAir, for your 4761KS MaxxFan, you'd use # MA10A40009K for the smoke-colored lid or # MA10A40002K for the white replacement lid.
If you're wanting to let more light into the interior of your RV, I'd go with the white color, otherwise use the smoke-colored lid. view full answer...
I reached out to my contact at Lippert who confirmed the bearings and seal included with the Hub Bearing Kit # BK2-100 is what you need for each up on your trailer axle.
Attached is an installation video for you to check out. view full answer...
We do have the replacement grease filter(s) that you are needing for your Ventline Pinnacle RV range hood.
- Replacement Grease Filter Kit for Ventline Pinnacle Low Profile 12V Range Hood # VE24QR (this is a pack of 6) view full answer...
Based on the appearance and the Global Link G on your lock it definitely looks like the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000019. Typically when replacing an entry door lock you need to check the size of your cutout. These companies aren't the best at making it easy to find an exact replacement so this is the only real way to do it.
The # 295-000019 fits door latch cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. As long as that... view full answer...
Yes, to replace the lens on your red Optronics LED Clearance or Side Marker Trailer Light w/ Reflector # MCL0040RBB you need the following:
- Replacement Red Lens for Optronics LED Side Marker / Clearance Light # OPT79NR view full answer...